AcousTEC 5mm Soundproof Underlay is a high-performance sound insulation floor underlay solution designed for carpet, wood and laminate flooring.
- Size : 1 x 6mtrs roll.
- Thickness : 5mm
- Area per roll : 6 sqm/ 64.56sqft
- Made from High Density recycled SBR rubber Materials bind with weatherproof PU binder.
- High density, appx 900kg/m3 rubber roll & it’s hard appearance provide strong support for hard flooring.
- Maximum width of rolls is 1 to 1.15mtrs where length can be as per desired.
- Suitable for acoustic underlay below engineered hardwood, ceramic, vinyl, screed, artificial turf, and indoor/outdoor sports flooring.
Besides, our 5mm AcousTEC underlay has solid rubber structure that helps the hard floor to lay firm on heavy wear and tear yet provides a high degree of soundproof or acoustic performance on hard floors. Its compact structure keeps performing without losing thickness over the decades.
The underlay is glued down on the base surface to lay the underlay fix and firm on the concrete or wooden surface. (Make sure the base surface is free of moisture and dirt). On the top of underlay then glue again to install the timber-wood floor as finish floor. The recommended glue use for AcousTEC 5 must be an acrylic, water-based or PU base binder use to stick rubber to concrete. Please avoid any solvent based glue which might affect the binding of underlay badly. The example soundproofing underlay system for engineered hardwood flooring describe above may vary in different counties or different floor application. Please refer to local specialist recommendations for the best solution. Whether it’s for floating floor underlay installation or glue down, AcousTEC 5mm noise reduction offers specialist sound insulation for engineered hardwood timber floors.
Sound insulation of a floor
The PU binder is a weatherproof glue and will hold against moisture or dampness that would typically compromise the quality over time.
The products range from high-density SBR rubber to weatherproof PU binder, which keeps the acoustic underlay firm below the floor for decades. AcousTEC underlay products underlay are under the provision of building regulations and meet the Australian building standard of underfloor acoustic performance. The products are tested at CSIRO lab in Australia for acoustic performance. An economical and affordable way to reduce noise and sound in the environment. It is environmentally friendly and available in the thickness of 2mm to 10mm to meet the floor acoustic underlay requirements. Enjoy the quieter life with a soundproof 5mm acoustic underlay. Sound insulated flooring combats both impact and airborne noise.
